Tinius Olsen
120kN Hydraulic Tensile Grip
Applications
Specifications
*Alternate wedge widths available
Required accessories (see below)
Hydraulic pumping unit
Hydraulic pumping unit (ref. 01036001) with grip control for use with the 120kN grips (ref. 01036010).
Specifications
Alignment fixture and grip faces
Alignment fixture (ref. 01036003)
This allows alignment adjustment to eliminate loading inconsistencies and inaccuracies that frequently occur during sample loading. It has a maximum capacity of 120kN/30klbf.
Wedge grip faces
These are used in the side loading hydraulic wedge grip body and are available in a variety of different shapes that best match the specimen profile.
Flat wedge specimens
Specimen thickness:
Narrow wedge set
Wedge width: 44.5mm /1.75in
Wide wedge set
Wedge width: 76.2mm/3.00in
Round wedge specimens
Specimen diameter: 12,15,20mm/0.5,0.75,1.0in
Vee wedge specimens
Specimen diameter:
Narrow wedge set
Wedge width: 50.8mm /2in
Wide wedge set
Wedge width: 76.2mm/3.00in
Round wedge specimens
Specimen diameter: 12,15,20mm/0.5,0.75,1.0in
Vee wedge specimens
Specimen diameter:
- Download Brochure
Please Fill the Fields to download pdf
- Mail us
Request a Proposal
Similar Accessories
Compression Anti-Buckling Fixture
Shear Loading Compression Fixture
Specimen Identification Station
Combined Loading Compression Fixture
HT53 Miniature Knurled Roller Grips
V-notched Shear Compression Fixture
HF74 3-Point Wide Variable Flexural
Compression Cage for Environmental Chamber
Flex cage for Environmental Chamber
330-012 3-Point Flex Test with LVDT
Short Beam 3-point Flexural Fixture
HT58 Lightweight Pneumatic Grips
Double Shear Bearing Strength Test - Procedure A